Gas Line Installation & Repair in NYC

OVERVIEW

Gas Work Done by the Book

Gas piping in New York City has to be installed under a Licensed Master Plumber, filed with the Department of Buildings, and tested before it goes into service. We handle every step.

That includes new lines for equipment, service upgrades for conversions, and repairs that get gas restored after a utility shutoff.

Adding equipment changes the gas load. A new boiler, a larger water heater, or a commercial kitchen line can mean bigger piping, a new regulator, or a larger meter, so we size the system for everything on it before work starts. When the service itself has to grow, we file the paperwork with Con Edison or National Grid alongside the DOB filing so both move at the same time.

Before any new or altered line goes into service, it has to pass a pressure test. Under the NYC Fuel Gas Code, typical low-pressure building piping is tested at no less than 1.5 times its working pressure and at least 3 psig, held for at least 30 minutes, and DOB has to authorize the gas before the utility will turn it on.

Key Requirements

  • Work performed under a NYC Licensed Master Plumber
  • Technicians with full DOB Gas Work Qualifications
  • Filed with the Department of Buildings
  • New and repaired piping pressure tested
  • Inspection before gas is turned on
  • Gas shut off? We handle the repairs, testing, and paperwork to get service restored.
WHAT WE INSTALL

Gas Piping for Every Building

From a single appliance hookup to high-capacity service for a campus, we size, install, and test gas piping to code.

Residential: lines for boilers, water heaters, ranges, and dryers.

Commercial: high-capacity lines, regulators, and kitchen equipment connections.

We also correct the conditions found during Local Law 152 gas piping inspections.

Talk to a licensed plumber

Gas Piping Services

  • New gas lines. Piping for boilers, water heaters, ranges, dryers, and kitchen equipment.
  • Service upgrades. Larger lines and regulators for added equipment or oil-to-gas conversions.
  • Repairs after a shutoff. Fixing leaks and non-compliant piping so service can be restored.
  • Pressure testing. Confirming new and repaired piping is tight before it goes into service.
  • LL152 corrections. Repairing conditions found during Local Law 152 inspections.
  • Utility paperwork. Filing the required paperwork with the gas utility for meters, new service, and restoration.
OUR APPROACH

How Gas Work Gets Done

Every gas job follows the same permitted, tested path from assessment to turn-on.

Assess

We review the gas load, the existing piping, and what the job needs to pass.

1

File

We file the work with the Department of Buildings and the required paperwork with the gas utility.

2

Install

New or repaired piping is installed to code.

3

Pressure Test

We test the piping to confirm it's tight before it goes into service.

4

Inspect & Restore

We handle the inspection and schedule the turn-on with the utility.

5
WHY CHOOSE US

Gas Work You Can Trust

Gas piping leaves no room for shortcuts. Here's why owners and managers call us for it.

Gas-Qualified Techs

Our technicians hold full DOB Gas Work Qualifications, not limited ones.

Filings Handled

DOB filings, utility paperwork, and inspections managed by our team.

Tested Before Service

Every new and repaired line is pressure tested before gas is turned on.

Large-Scale Experience

High-capacity gas lines and regulators for boiler plants, institutions, and large commercial buildings.

FAQ

Common Questions About Gas Lines

What to know before gas piping work starts in NYC.

Gas piping work in NYC must be performed under a Licensed Master Plumber by workers who hold a DOB Gas Work Qualification, and filed with the Department of Buildings. Our technicians hold full qualifications, and we handle the filing.

Yes. We find and repair the problem, pressure test the piping, handle the DOB filing and inspection, and file the required paperwork with the utility to restore service.

Yes. We run gas piping and connections for restaurant and commercial kitchen equipment.

Yes. We install high-capacity gas lines and regulators for large buildings and boiler plants, including oil-to-gas conversions, and we plan the work to keep downtime to a minimum.

Yes. New gas piping and changes to existing piping are filed with the Department of Buildings by the Licensed Master Plumber, pressure tested, and inspected before gas is authorized. Gas run without a permit is a common reason the utility later shuts service off.

Yes. We check that the existing piping and meter can carry the added load, run the new branch, install a shutoff valve at the appliance, pressure test it, and get it signed off before the appliance is connected.

See all heating & plumbing questions

Need Gas Work Done Right?

Get licensed gas piping that's filed, tested, and inspected, from a single hookup to full building service.

Gas line installation and repair for homes and commercial buildings across New York City.